Command Reference Guide

Network Interface Commands
CLI Command Reference
September 2014 Page 45
HP Moonshot Switch Module CLI Command Reference
network mac-address
This command sets locally administered MAC addresses. The following rules apply:
• Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally administered (b'0') or locally
administered (b'1').
• Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an individual address (b'0')
or a group address (b'1').
• The second character, of the twelve character macaddr, must be 2, 6, A or E.
A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').
network mac-type
This command specifies whether the switch uses the burned in MAC address or the locally-administered MAC
address.
no network mac-type
This command resets the value of MAC address to its default.
Format
network mac-address macaddr
Mode Privileged EXEC
Default burnedin
Format
network mac-type {local | burnedin}
Mode Privileged EXEC
Format
no network mac-type
Mode Privileged EXEC