Command Reference Guide

LLDP (802.1AB) Commands
CLI Command Reference
September 2014 Page 456
HP Moonshot Switch Module CLI Command Reference
no lldp notification-interval
Use this command to return the notification interval to the default value.
clear lldp statistics
Use this command to reset all LLDP statistics, including MED-related information.
clear lldp remote-data
Use this command to delete all information from the LLDP remote data table, including MED-related
information.
show lldp
Use this command to display a summary of the current LLDP configuration.
Format
no lldp notification-interval
Mode Global Config
Format
clear lldp statistics
Mode Privileged Exec
Format
clear lldp remote-data
Mode Global Config
Format
show lldp
Mode Privileged Exec
Term Definition
Transmit Interval How frequently the system transmits local data LLDPDUs, in seconds.
Transmit Hold
Multiplier
The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
Re-initialization
Delay
The delay before re-initialization, in seconds.
Notification
Interval
How frequently the system sends remote data change notifications, in seconds.