Command Reference Guide

LLDP (802.1AB) Commands
CLI Command Reference
September 2014 Page 457
HP Moonshot Switch Module CLI Command Reference
show lldp interface
Use this command to display a summary of the current LLDP configuration for a specific interface or for all
interfaces.
show lldp statistics
Use this command to display the current LLDP traffic and remote table statistics for a specific interface or for
all interfaces.
Format
show lldp interface {unit/slot/port | all}
Mode Privileged Exec
Term Definition
Interface The interface in a
unit/slot/port format.
Link Shows whether the link is up or down.
Transmit Shows whether the interface transmits LLDPDUs.
Receive Shows whether the interface receives LLDPDUs.
Notify Shows whether the interface sends remote data change notifications.
TLVs Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can be 0
(Port Description), 1 (System Name), 2 (System Description), or 3 (System Capability).
Mgmt Shows whether the interface transmits system management address information in the
LLDPDUs.
Format
show lldp statistics {unit/slot/port | all}
Mode Privileged Exec
Term Definition
Last Update The amount of time since the last update to the remote table in days, hours, minutes, and
seconds.
Total Inserts Total number of inserts to the remote data table.
Total Deletes Total number of deletes from the remote data table.
Total Drops Total number of times the complete remote data received was not inserted due to
insufficient resources.
Total Ageouts Total number of times a complete remote data entry was deleted because the Time to Live
interval expired.