Command Reference Guide

LLDP (802.1AB) Commands
CLI Command Reference
September 2014 Page 459
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command.
(Routing) #show lldp remote-device all
LLDP Remote Device Summary
Local
Interface RemID Chassis ID Port ID System Name
------- ------- -------------------- ------------------ ------------------
1/0/1
1/0/2
1/0/3
1/0/4
1/0/5
1/0/6
1/0/7 2 00:FC:E3:90:01:0F 00:FC:E3:90:01:11
1/0/7 3 00:FC:E3:90:01:0F 00:FC:E3:90:01:12
1/0/7 4 00:FC:E3:90:01:0F 00:FC:E3:90:01:13
1/0/7 5 00:FC:E3:90:01:0F 00:FC:E3:90:01:14
1/0/7 1 00:FC:E3:90:01:0F 00:FC:E3:90:03:11
1/0/7 6 00:FC:E3:90:01:0F 00:FC:E3:90:04:11
1/0/8
--More-- or (q)uit
show lldp remote-device detail
Use this command to display detailed information about remote devices that transmit current LLDP data to an
interface on the system.
Format
show lldp remote-device detail unit/slot/port
Mode Privileged EXEC
Term Definition
Local Interface The interface that received the LLDPDU from the remote device.
Remote Identifier An internal identifier to the switch to mark each remote device to the system.
Chassis ID Subtype The type of identification used in the Chassis ID field.
Chassis ID The chassis of the remote device.
Port ID Subtype The type of port on the remote device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the remote device.
System Description Describes the remote system by identifying the system name and versions of
hardware, operating system, and networking software supported in the device.
Port Description Describes the port in an alpha-numeric format. The port description is configurable.
System Capabilities
Supported
Indicates the primary function(s) of the device.
System Capabilities
Enabled
Shows which of the supported system capabilities are enabled.