Command Reference Guide

LLDP (802.1AB) Commands
CLI Command Reference
September 2014 Page 460
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command.
(Routing) #show lldp remote-device detail 1/0/7
LLDP Remote Device Detail
Local Interface: 1/0/7
Remote Identifier: 2
Chassis ID Subtype: MAC Address
Chassis ID: 00:FC:E3:90:01:0F
Port ID Subtype: MAC Address
Port ID: 00:FC:E3:90:01:11
System Name:
System Description:
Port Description:
System Capabilities Supported:
System Capabilities Enabled:
Time to Live: 24 seconds
show lldp local-device
Use this command to display summary information about the advertised LLDP local data. This command can
display summary information or detail for each interface.
Management Address For each interface on the remote device with an LLDP agent, lists the type of
address the remote LLDP agent uses and specifies the address used to obtain
information related to the device.
Time To Live The amount of time (in seconds) the remote device's information received in the
LLDPDU should be treated as valid information.
Format
show lldp local-device {unit/slot/port | all}
Mode Privileged EXEC
Term Definition
Interface The interface in a
unit/slot/port format.
Port ID The port ID associated with this interface.
Port Description The port description associated with the interface.
Term Definition