Command Reference Guide

LLDP-MED Commands
CLI Command Reference
September 2014 Page 465
HP Moonshot Switch Module CLI Command Reference
show lldp med
Use this command to display a summary of the current LLDP MED configuration.
Example: The following shows example CLI display output for the command.
(Routing) #show lldp med
LLDP MED Global Configuration
Fast Start Repeat Count: 3
Device Class: Network Connectivity
(Routing) #
show lldp med interface
Use this command to display a summary of the current LLDP MED configuration for a specific interface. unit/
slot/port indicates a specific physical interface. all indicates all valid LLDP interfaces
.
Example: The following shows example CLI display output for the command.
(Routing) #show lldp med interface all
Interface Link configMED operMED ConfigNotify TLVsTx
--------- ------ --------- -------- ------------ -----------
1/0/1 Down Disabled Disabled Disabled 0,1
1/0/2 Up Disabled Disabled Disabled 0,1
1/0/3 Down Disabled Disabled Disabled 0,1
1/0/4 Down Disabled Disabled Disabled 0,1
1/0/5 Down Disabled Disabled Disabled 0,1
1/0/6 Down Disabled Disabled Disabled 0,1
1/0/7 Down Disabled Disabled Disabled 0,1
1/0/8 Down Disabled Disabled Disabled 0,1
1/0/9 Down Disabled Disabled Disabled 0,1
1/0/10 Down Disabled Disabled Disabled 0,1
1/0/11 Down Disabled Disabled Disabled 0,1
1/0/12 Down Disabled Disabled Disabled 0,1
1/0/13 Down Disabled Disabled Disabled 0,1
1/0/14 Down Disabled Disabled Disabled 0,1
TLV Codes: 0- Capabilities, 1- Network Policy
2- Location, 3- Extended PSE
4- Extended Pd, 5- Inventory
--More-- or (q)uit
(Routing) #show lldp med interface 1/0/2
Format
show lldp med
Mode Privileged Exec
Format
show lldp med interface {unit/slot/port | all}
Mode Privileged Exec