Command Reference Guide

Denial of Service Commands
CLI Command Reference
September 2014 Page 473
HP Moonshot Switch Module CLI Command Reference
dos-control sipdip
This command enables Source IP address = Destination IP address (SIP = DIP) Denial of Service protection. If
the mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress with SIP =
DIP, the packets will be dropped if the mode is enabled
.
no dos-control sipdip
This command disables Source IP address = Destination IP address (SIP = DIP) Denial of Service prevention.
dos-control smacdmac
This command enables Source MAC address = Destination MAC address (SMAC = DMAC) Denial of Service
protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If packets
ingress with SMAC = DMAC, the packets will be dropped if the mode is enabled.
no dos-control smacdmac
This command disables Source MAC address = Destination MAC address (SMAC = DMAC) DoS protection.
Default disabled
Format
dos-control sipdip
Mode Global Config
Format
no dos-control sipdip
Mode Global Config
Default disabled
Format
dos-control smacdmac
Mode Global Config
Format
no dos-control smacdmac
Mode Global Config