Command Reference Guide

Denial of Service Commands
CLI Command Reference
September 2014 Page 477
HP Moonshot Switch Module CLI Command Reference
dos-control tcpsyn
This command enables TCP SYN and L4 source = 0-1023 Denial of Service protection. If the mode is enabled,
Denial of Service prevention is active for this type of attack. If packets ingress having TCP flag SYN set and an
L4 source port from 0 to 1023, the packets will be dropped if the mode is enabled.
no dos-control tcpsyn
This command sets disables TCP SYN and L4 source = 0-1023 Denial of Service protection.
dos-control tcpsynfin
This command enables TCP SYN and FIN Denial of Service protection. If the mode is enabled, Denial of Service
prevention is active for this type of attack. If packets ingress having TCP flags SYN and FIN set, the packets will
be dropped if the mode is enabled.
no dos-control tcpsynfin
This command sets disables TCP SYN & FIN Denial of Service protection.
Default disabled
Format
dos-control tcpsyn
Mode Global Config
Format
no dos-control tcpsyn
Mode Global Config
Default disabled
Format
dos-control tcpsynfin
Mode Global Config
Format
no dos-control tcpsynfin
Mode Global Config