Command Reference Guide

ISDP Commands
CLI Command Reference
September 2014 Page 484
HP Moonshot Switch Module CLI Command Reference
isdp advertise-v2
This command enables the sending of ISDP version 2 packets from the device.
no isdp advertise-v2
This command disables the sending of ISDP version 2 packets from the device.
isdp enable
This command enables ISDP on an interface or range of interfaces.
no isdp enable
This command disables ISDP on the interface.
clear isdp counters
This command clears ISDP counters.
Default Enabled
Format
isdp advertise-v2
Mode Global Config
Format
no isdp advertise-v2
Mode Global Config
Note: ISDP must be enabled both globally and on the interface in order for the interface to transmit
ISDP packets. If ISDP is globally disabled on the switch, the interface will not transmit ISDP packets,
regardless of the ISDP status on the interface. To enable ISDP globally, use the command “isdp run”
on page 483.
Default Enabled
Format
isdp enable
Mode Interface Config
Format
no isdp enable
Mode Interface Config
Format
clear isdp counters
Mode Privileged EXEC