Command Reference Guide

ISDP Commands
CLI Command Reference
September 2014 Page 485
HP Moonshot Switch Module CLI Command Reference
clear isdp table
This command clears entries in the ISDP table.
show isdp
This command displays global ISDP settings.
Example: The following shows example CLI display output for the command.
(Routing) #show isdp
Timer.......................................... 30
Hold Time...................................... 180
Version 2 Advertisements....................... Enabled
Format
clear isdp table
Mode Privileged EXEC
Format
show isdp
Mode Privileged EXEC
Term Definition
Timer The frequency with which this device sends ISDP packets. This value is given in seconds.
Hold Time The length of time the receiving device should save information sent by this device. This
value is given in seconds.
Version 2
Advertisements
The setting for sending ISDPv2 packets. If disabled, version 1 packets are transmitted.
Neighbors table time
since last change
The amount of time that has passed since the ISPD neighbor table changed.
Device ID The Device ID advertised by this device. The format of this Device ID is characterized by
the value of the Device ID Format object.
Device ID Format
Capability
Indicates the Device ID format capability of the device.
•
serialNumber indicates that the device uses a serial number as the format for its
Device ID.
•
macAddress indicates that the device uses a Layer 2 MAC address as the format for
its Device ID.
•
other indicates that the device uses its platform-specific format as the format for its
Device ID.
Device ID Format Indicates the Device ID format of the device.
•
serialNumber indicates that the value is in the form of an ASCII string containing the
device serial number.
•
macAddress indicates that the value is in the form of a Layer 2 MAC address.
•
other indicates that the value is in the form of a platform specific ASCII string
containing info that identifies the device. For example, ASCII string contains
serialNumber appended/prepended with system name.