Command Reference Guide

ISDP Commands
CLI Command Reference
September 2014 Page 486
HP Moonshot Switch Module CLI Command Reference
Neighbors table time since last change......... 0 days 00:00:00
Device ID...................................... 1114728
Device ID format capability.................... Serial Number, Host Name
Device ID format............................... Serial Number
show isdp interface
This command displays ISDP settings for the specified interface.
Example: The following shows example CLI display output for the command.
(Routing) #show isdp interface 1/0/1
Interface Mode
--------------- ----------
1/0/1 Enabled
Example: The following shows example CLI display output for the command.
(Routing) #show isdp interface all
Interface Mode
--------------- ----------
1/0/1 Enabled
1/0/2 Enabled
1/0/3 Enabled
1/0/4 Enabled
1/0/5 Enabled
1/0/6 Enabled
1/0/7 Enabled
1/0/8 Enabled
Format
show isdp interface {all | unit/slot/port}
Mode Privileged EXEC
Term Definition
Interface The unit/slot/port of the specified interface.
Mode ISDP mode enabled/disabled status for the interface(s).