Command Reference Guide

Priority-Based Flow Control Commands
CLI Command Reference
September 2014 Page 497
HP Moonshot Switch Module CLI Command Reference
no priority-flow-control priority
Use the no priority-flow-control priority command in Datacenter-Bridging Config mode to enable lossy
behavior on all priorities on the interface. This has no effect on interfaces not enabled for PFC or with no
lossless priorities configured.
clear priority-flow-control statistics
Use the clear priority-flow-control statistics command to clear all global and interface PFC statistics.
Example: The following shows examples of the commands.
console#clear priority-flow-control statistics
show interface priority-flow-control
Use the show interface priority-flow-control command in Privileged EXEC mode to display the PFC information
of a given interface or all interfaces.
When no interface number is provide, the following information displays for all interfaces.
Format
no priority-flow-control priority
Mode Datacenter-Bridging Config mode
Format
clear priority-flow-control statistics
Mode Privileged EXEC
Format
show interface [unit/slot/port] priority-flow-control
Mode Privileged EXEC
Parameter Description
Port The port associated with the rest of the data in the row.
Drop Priorities The 802.1p priority values that are configured with a drop priority. Drop priorities do not
participate in pause.
No-Drop
Priorities
The 802.1p priority values that are configured with a no-drop priority. If an 802.1p priority
that is designated as no-drop is congested, the priority is paused.
Operational
Status
The operational status of the interface.