Command Reference Guide

Priority-Based Flow Control Commands
CLI Command Reference
September 2014 Page 498
HP Moonshot Switch Module CLI Command Reference
When no interface number is provide, the following information displays for all interfaces.
Example: The following examples show the priority flow control status and statistics.
(Routing) #show interface 1/0/3 priority-flow-control
Interface Detail: 1/0/3
Operational State: Active
Configured State: Enabled
Configured Drop Priorities: 0,2-7
Configured No-Drop Priorities: 1
Operational Drop Priorities: 0,2-7
Operational No-Drop Priorities: 1
Delay Allowance: 36432 bit times
Peer Configuration Compatible: N/A
Compatible Configuration Count: 0
Incompatible Configuration Count: 0
Parameter Description
Interface Detail The port for which data is displayed.
Operational Status The operational status of the interface.
Configured State The administrative mode of PFC on the interface.
Configured Drop
Priorities
The 802.1p priority values that are configured with a drop priority on the interface.
Drop priorities do not participate in pause.
Configured No-Drop
Priorities
The 802.1p priority values that are configured with a no-drop priority on the
interface. If an 802.1p priority that is designated as no-drop is congested, the priority
is paused.
Operational Drop
Priorities
The 802.1p priority values that the switch is using with a drop priority. The
operational drop priorities might not be the same as the configured priorities if the
interface has accepted different priorities from a peer device
Configured No-Drop
Priorities
The 802.1p priority values that the switch is using with a no-drop priority. The
operational drop priorities might not be the same as the configured priorities if the
interface has accepted different priorities from a peer device
Delay Allowance The operational status of the interface.
Peer Configuration
Compatible
Indicates whether the local switch has accepted a compatible configuration from a
peer switch.
Compatible
Configuration Count
The number of received configurations accepted and processed as valid. This number
does not include duplicate configurations.
Incompatible
Configuration Count
The number of received configurations that were not accepted from a peer device
because they were incompatible.
Priority The 802.1p priority value.
Received PFC Frames The number of PFC frames received by the interface with the associated 802.1p
priority.
Transmitted PFC
Frames
The number of PFC frames transmitted by the interface with the associated 802.1p
priority.