Command Reference Guide

IPv6 Management Commands
CLI Command Reference
September 2014 Page 50
HP Moonshot Switch Module CLI Command Reference
serviceport ipv6 address
Use the options of this command to manually configure IPv6 global address, enable/disable stateless global
address autoconfiguration and to enable/disable dhcpv6 client protocol information on the service port.
no serviceport ipv6 address
Use the command no serviceport ipv6 address to remove all configured IPv6 prefixes on the service port
interface.
Use the command with the address option to remove the manually configured IPv6 global address on the
network port interface.
Use the command with the autoconfig option to disable the stateless global address autoconfiguration on the
service port.
Use the command with the dhcp option to disable the dhcpv6 client protocol on the service port.
Note: Multiple IPv6 prefixes can be configured on the service port.
Format
serviceport ipv6 address {address/prefix-length [eui64]|autoconfig|dhcp}
Mode Privileged EXEC
Parameter Description
address IPv6 prefix in IPv6 global address format.
prefix-length IPv6 prefix length value.
eui64 Formulate IPv6 address in eui64 address format.
autoconfig Configure stateless global address autoconfiguration capability.
dhcp Configure dhcpv6 client protocol.
Format
no serviceport ipv6 address {address/prefix-length [eui64] | autoconfig | dhcp}
Mode Privileged EXEC