Command Reference Guide

Address Resolution Protocol Commands
CLI Command Reference
September 2014 Page 502
HP Moonshot Switch Module CLI Command Reference
no ip proxy-arp
This command disables proxy ARP on a router interface.
ip local-proxy-arp
Use this command to allow an interface to respond to ARP requests for IP addresses within the subnet and to
forward traffic between hosts in the subnet.
no ip local-proxy-arp
This command resets the local proxy ARP mode on the interface to the default value.
arp cachesize
This command configures the ARP cache size. The ARP cache size range is 384–6144.
no arp cachesize
This command configures the default ARP cache size.
Format
no ip proxy-arp
Mode Interface Config
Default disabled
Format
ip local-proxy-arp
Mode Interface Config
Format
no ip local-proxy-arp
Mode Interface Config
Default 6144
Format
arp cachesize cache-size
Mode Global Config
Format
no arp cachesize
Mode Global Config