Command Reference Guide

IP Routing Commands
CLI Command Reference
September 2014 Page 511
HP Moonshot Switch Module CLI Command Reference
no ip default-gateway
This command removes the default gateway address from the configuration.
release dhcp
Use this command to force the DHCPv4 client to release the leased address from the specified interface. The
DHCP client sends a DHCP Release message telling the DHCP server that it no longer needs the IP address, and
that the IP address can be reassigned to another
renew dhcp
Use this command to force the DHCPv4 client to immediately renew an IPv4 address lease on the specified
interface.
renew dhcp network-port
Use this command to renew an IP address on a network port.
renew dhcp service-port
Use this command to renew an IP address on a service port.
Format
no ip default-gateway ipaddr
Mode Interface Config
Note: This command can be used on in-band ports as well as the service or network (out-of-band)
port.
Format
renew dhcp unit/slot/port
Mode Privileged EXEC
Format
renew dhcp network-port
Mode Privileged EXEC
Format
renew dhcp service-port
Mode Privileged EXEC