Command Reference Guide

IP Routing Commands
CLI Command Reference
September 2014 Page 525
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command.
(Routing) #show ip route summary
Connected Routes............................... 7
Static Routes.................................. 1
RIP Routes..................................... 20
OSPF Routes.................................... 1004
Intra Area Routes............................ 4
Inter Area Routes............................ 1000
External Type-1 Routes....................... 0
External Type-2 Routes....................... 0
Reject Routes.................................. 0
Total routes................................... 1032
Best Routes (High)............................. 1032 (1032)
Alternate Routes............................... 0
Route Adds..................................... 1010
Route Modifies................................. 1
Route Deletes.................................. 10
Unresolved Route Adds.......................... 0
Invalid Route Adds............................. 0
Failed Route Adds.............................. 0
Reserved Locals................................ 0
Unique Next Hops (High)........................ 13 (13)
Next Hop Groups (High)......................... 13 (14)
ECMP Groups (High)............................. 2 (3)
ECMP Routes.................................... 1001
Truncated ECMP Routes.......................... 0
Reserved Locals The number of routing table entries reserved for a local subnet on a routing interface that
is down. Space for local routes is always reserved so that local routes can be installed when
a routing interface bounces.
Unique Next
Hops (High)
The number of distinct next hops used among all routes currently in the routing table.
These include local interfaces for local routes and neighbors for indirect routes. The value
in parentheses indicates the highest count of unique next hops since counters were last
cleared.
Next Hop Groups
(High)
The current number of next hop groups in use by one or more routes. Each next hop group
includes one or more next hops. The value in parentheses indicates the highest count of
next hop groups since counters were last cleared.
ECMP Groups
(High)
The number of next hop groups with multiple next hops. The value in parentheses indicates
the highest count of next hop groups since counters were last cleared.
ECMP Routes The number of routes with multiple next hops currently in the routing table.
Truncated ECMP
Routes
The number of ECMP routes that are currently installed in the forwarding table with just
one next hop. The forwarding table may limit the number of ECMP routes or the number
of ECMP groups. When an ECMP route cannot be installed because such a limit is reached,
the route is installed with a single next hop.
ECMP Retries The number of ECMP routes that have been installed in the forwarding table after initially
being installed with a single next hop.
Routes with n
Next Hops
The current number of routes with each number of next hops.
Term Definition