Command Reference Guide

DHCP and BOOTP Relay Commands
CLI Command Reference
September 2014 Page 545
HP Moonshot Switch Module CLI Command Reference
bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the system. When the
BOOTP relay agent receives a BOOTREQUEST message, it MAY use the seconds-since-client-began-booting field
of the request as a factor in deciding whether to relay the request or not. The parameter has a range of 0 to
100 seconds.
no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay on the system.
show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Default 0
Format
bootpdhcprelay minwaittime 0-100
Mode Global Config
Format
no bootpdhcprelay minwaittime
Mode Global Config
Format
show bootpdhcprelay
Modes •Privileged EXEC
• User EXEC
Term Definition
Maximum Hop Count The maximum allowable relay agent hops.
Minimum Wait Time (Seconds) The minimum wait time.
Admin Mode Indicates whether relaying of requests is enabled or disabled.
Circuit Id Option Mode The DHCP circuit Id option which may be enabled or disabled.