Command Reference Guide

Open Shortest Path First Commands
CLI Command Reference
September 2014 Page 557
HP Moonshot Switch Module CLI Command Reference
area nssa (OSPF)
This command configures the specified areaid to function as an NSSA.
no area nssa
This command disables nssa from the specified area id.
area nssa default-info-originate (OSPF)
This command configures the metric value and type for the default route advertised into the NSSA. The
optional metric parameter specifies the metric of the default route and is to be in a range of 1-16777214. If no
metric is specified, the default value is ****. The metric type can be comparable (nssa-external 1) or non-
comparable (nssa-external 2).
no area nssa default-info-originate (OSPF)
This command disables the default route advertised into the NSSA.
area nssa no-redistribute (OSPF)
This command configures the NSSA Area Border router (ABR) so that learned external routes will not be
redistributed to the NSSA.
Format
area areaid nssa
Mode Router OSPF Config
Format
no area areaid nssa
Mode Router OSPF Config
Format
area areaid nssa default-info-originate [metric] [{comparable | non-comparable}]
Mode Router OSPF Config
Format
no area areaid nssa default-info-originate [metric] [{comparable | non-comparable}]
Mode Router OSPF Config
Format
area areaid nssa no-redistribute
Mode Router OSPF Config