Command Reference Guide

IPv6 Management Commands
CLI Command Reference
September 2014 Page 56
HP Moonshot Switch Module CLI Command Reference
Example: IPv6 ping success
(Routing) #ping 2001::1
Pinging 2001::1 with 64 bytes of data:
Send count=3, Receive count=3 from 2001::1
Average round trip time = 3.00 ms
Example: IPv6 ping failure
(Routing) #ping ipv6 2001::4
Pinging 2001::4 with 64 bytes of data:
Send count=3, Receive count=0 from 2001::4
Average round trip time = 0.00 ms
show network ipv6 dhcp statistics
This command displays the statistics of the DHCPv6 client running on the network management interface.
count Use the
count parameter to specify the number of ping packets (ICMP Echo
requests) that are sent to the destination address specified by the ip-address field.
The range for
count is 1 to 15 requests.
interval Use the
interval parameter to specify the time between Echo Requests, in
seconds. Range is 1 to 60 seconds.
size Use the
size parameter to specify the size, in bytes, of the payload of the Echo
Requests sent. Range is 0 to 65507 bytes.
source Use the source parameter to specify the source IP/IPv6 address or interface to use
when sending the Echo requests packets.
Format
show network ipv6 dhcp statistics
Mode •Privileged EXEC
• User EXEC
Field Description
DHCPv6 Advertisement Packets
Received
The number of DHCPv6 Advertisement packets received on the network
interface.
DHCPv6 Reply Packets Received The number of DHCPv6 Reply packets received on the network interface.
Received DHCPv6
Advertisement Packets
Discarded
The number of DHCPv6 Advertisement packets discarded on the network
interface.
Received DHCPv6 Reply Packets
Discarded
The number of DHCPv6 Reply packets discarded on the network interface.
DHCPv6 Malformed Packets
Received
The number of DHCPv6 packets that are received malformed on the network
interface.
Total DHCPv6 Packets Received The total number of DHCPv6 packets received on the network interface.
Parameter Description