Command Reference Guide

Open Shortest Path First Commands
CLI Command Reference
September 2014 Page 561
HP Moonshot Switch Module CLI Command Reference
area stub (OSPF)
This command creates a stub area for the specified area ID. A stub area is characterized by the fact that AS
External LSAs are not propagated into the area. Removing AS External LSAs and Summary LSAs can significantly
reduce the link state database of routers within the stub area.
no area stub
This command deletes a stub area for the specified area ID.
area stub no-summary (OSPF)
This command configures the Summary LSA mode for the stub area identified by areaid. Use this command to
prevent LSA Summaries from being sent.
no area stub no-summary
This command configures the default Summary LSA mode for the stub area identified by areaid.
area virtual-link (OSPF)
This command creates the OSPF virtual interface for the specified areaid and neighbor. The neighbor
parameter is the Router ID of the neighbor.
Format
area areaid stub
Mode Router OSPF Config
Format
no area areaid stub
Mode Router OSPF Config
Default disabled
Format
area areaid stub no-summary
Mode Router OSPF Config
Format
no area areaid stub no-summary
Mode Router OSPF Config
Format
area areaid virtual-link neighbor
Mode Router OSPF Config