Command Reference Guide

Open Shortest Path First Commands
CLI Command Reference
September 2014 Page 563
HP Moonshot Switch Module CLI Command Reference
no area virtual-link dead-interval
This command configures the default dead interval for the OSPF virtual interface on the virtual interface
identified by
areaid and neighbor. The neighbor parameter is the Router ID of the neighbor.
area virtual-link hello-interval (OSPF)
This command configures the hello interval for the OSPF virtual interface on the virtual interface identified by
areaid and neighbor. The neighbor parameter is the Router ID of the neighbor. The range for seconds is 1 to
65535.
no area virtual-link hello-interval
This command configures the default hello interval for the OSPF virtual interface on the virtual interface
identified by
areaid and neighbor. The neighbor parameter is the Router ID of the neighbor.
area virtual-link retransmit-interval (OSPF)
This command configures the retransmit interval for the OSPF virtual interface on the virtual interface
identified by
areaid and neighbor. The neighbor parameter is the Router ID of the neighbor. The range for
seconds is 0 to 3600.
no area virtual-link retransmit-interval
This command configures the default retransmit interval for the OSPF virtual interface on the virtual interface
identified by
areaid and neighbor. The neighbor parameter is the Router ID of the neighbor.
Format
no area areaid virtual-link neighbor dead-interval
Mode Router OSPF Config
Default 10
Format
area areaid virtual-link neighbor hello-interval 1-65535
Mode Router OSPF Config
Format
no area areaid virtual-link neighbor hello-interval
Mode Router OSPF Config
Default 5
Format
area areaid virtual-link neighbor retransmit-interval seconds
Mode Router OSPF Config
Format
no area areaid virtual-link neighbor retransmit-interval
Mode Router OSPF Config