Command Reference Guide

Open Shortest Path First Commands
CLI Command Reference
September 2014 Page 574
HP Moonshot Switch Module CLI Command Reference
no trapflags
Use this command to revert to the default reference bandwidth.
• To disable the individual flag, enter the
group name followed by that particular flag.
• To disable all the flags in that group, give the group name followed by
all.
• To disable all the flags, give the command as
trapflags all.
Format
no trapflags {
all |
errors {all | authentication-failure | bad-packet | config-error | virt-
authentication-failure | virt-bad-packet | virt-config-error} |
lsa {all | lsa-maxage | lsa-originate} |
overflow {all | lsdb-overflow | lsdb-approaching-overflow} |
retransmit {all | packets | virt-packets} |
state-change {all | if-state-change | neighbor-state-change | virtif-state-
change | virtneighbor-state-change}
}
Mode Router OSPF Config