Command Reference Guide

Open Shortest Path First Commands
CLI Command Reference
September 2014 Page 579
HP Moonshot Switch Module CLI Command Reference
ip ospf retransmit-interval
This command sets the OSPF retransmit Interval for the specified interface or range of interfaces. The
retransmit interval is specified in seconds. The value for
seconds is the number of seconds between link-state
advertisement retransmissions for adjacencies belonging to this router interface. This value is also used when
retransmitting database description and link-state request packets. Valid values range from 0 to 3600 (1 hour).
no ip ospf retransmit-interval
This command sets the default OSPF retransmit Interval for the specified interface.
ip ospf transmit-delay
This command sets the OSPF Transit Delay for the specified interface or range of interfaces. The transmit delay
is specified in seconds. In addition, it sets the estimated number of seconds it takes to transmit a link state
update packet over this interface. Valid values for
seconds range from 1 to 3600 (1 hour).
no ip ospf transmit-delay
This command sets the default OSPF Transit Delay for the specified interface.
Default 5
Format
ip ospf retransmit-interval 0-3600
Mode Interface Config
Format
no ip ospf retransmit-interval
Mode Interface Config
Default 1
Format
ip ospf transmit-delay 1-3600
Mode Interface Config
Format
no ip ospf transmit-delay
Mode Interface Config