Command Reference Guide

Open Shortest Path First Commands
CLI Command Reference
September 2014 Page 590
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command.
(alpha3) #show ip ospf
Router ID...................................... 3.3.3.3
OSPF Admin Mode................................ Enable
RFC 1583 Compatibility......................... Enable
External LSDB Limit............................ No Limit
Exit Overflow Interval......................... 0
Spf Delay Time................................. 5
Spf Hold Time.................................. 10
Flood Pacing Interval.......................... 33 ms
LSA Refresh Group Pacing Time.................. 60 sec
Opaque Capability.............................. Enable
AutoCost Ref BW................................ 100 Mbps
Default Passive Setting........................ Disabled
Maximum Paths.................................. 4
Default Metric................................. Not configured
Stub Router Configuration...................... <val>
Stub Router Startup Time....................... <val> seconds
Summary LSA Metric Override.................... Enabled (<met>)
Default Route Advertise........................ Disabled
Always......................................... FALSE
Metric......................................... Not configured
Metric Type.................................... External Type 2
Number of Active Areas......................... 1 (1 normal, 0 stub, 0 nssa)
ABR Status..................................... Disable
ASBR Status.................................... Disable
Stub Router.................................... FALSE
Stub Router Status............................. Inactive
Stub Router Reason............................. <reason>
Stub Router Startup Time Remaining............. <duration> seconds
Stub Router Duration........................... <duration>
External LSDB Overflow......................... FALSE
NSF Restart Age Number of seconds until the graceful restart grace period expires.
NSF Restart Exit
Reason
Indicates why the router last exited the last restart:
• None—Graceful restart has not been attempted.
• In Progress—Restart is in progress.
• Completed—The previous graceful restart completed successfully.
• Timed Out—The previous graceful restart timed out.
• Topology Changed—The previous graceful restart terminated prematurely because of
a topology change.
NSF Help Support Indicates whether helpful neighbor functionality has been enabled for OSPF for planned
restarts, unplanned restarts, or both (Always).
NSF help Strict
LSA checking
Indicates whether strict LSA checking has been enabled. If enabled, then an OSPF helpful
neighbor will exit helper mode whenever a topology change occurs. If disabled, an OSPF
neighbor will continue as a helpful neighbor in spite of topology changes.
Term Definition