Command Reference Guide

Open Shortest Path First Commands
CLI Command Reference
September 2014 Page 591
HP Moonshot Switch Module CLI Command Reference
External LSA Count............................. 0
External LSA Checksum.......................... 0
AS_OPAQUE LSA Count............................ 0
AS_OPAQUE LSA Checksum......................... 0
New LSAs Originated............................ 55
LSAs Received.................................. 82
LSA Count...................................... 1
Maximum Number of LSAs......................... 24200
LSA High Water Mark............................ 9
AS Scope LSA Flood List Length................. 0
Retransmit List Entries........................ 0
Maximum Number of Retransmit Entries........... 96800
Retransmit Entries High Water Mark............. 1
NSF Helper Support............................. Always
NSF Helper Strict LSA Checking................. Enabled
show ip ospf abr
This command displays the internal OSPF routing table entries to Area Border Routers (ABR). This command
takes no options.
Format
show ip ospf abr
Mode •Privileged EXEC
• User EXEC
Term Definition
Type The type of the route to the destination. It can be either:
•intra — Intra-area route
• inter — Inter-area route
Router ID Router ID of the destination.
Cost Cost of using this route.
Area ID The area ID of the area from which this route is learned.
Next Hop Next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the next hop.