Command Reference Guide

Open Shortest Path First Commands
CLI Command Reference
September 2014 Page 597
HP Moonshot Switch Module CLI Command Reference
Authentication Type............................ None
Metric Cost.................................... 1 (computed)
Passive Status................................. Non-passive interface
OSPF Mtu-ignore................................ Disable
Flood Blocking................................. Disable
OSPF is not enabled on this interface.
(Routing) #
show ip ospf interface brief
This command displays brief information for the IFO object or virtual interface tables.
Format
show ip ospf interface brief
Mode •Privileged EXEC
• User EXEC
Term Definition
Interface unit/slot/port
OSPF Admin Mode States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID The OSPF Area Id for the specified interface.
Router Priority A number representing the OSPF Priority for the specified interface.
Cost The metric cost of the OSPF interface.
Hello Interval A number representing the OSPF Hello Interval for the specified interface.
Dead Interval A number representing the OSPF Dead Interval for the specified interface.
Retransmit Interval A number representing the OSPF Retransmit Interval for the specified interface.
Interface Transmit
Delay
A number representing the OSPF Transmit Delay for the specified interface.
LSA Ack Interval A number representing the OSPF LSA Acknowledgment Interval for the specified
interface.