Command Reference Guide

Open Shortest Path First Commands
CLI Command Reference
September 2014 Page 605
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command.
(Router) #show ip ospf traffic
Time Since Counters Cleared: 4000 seconds
OSPFv2 Packet Statistics
Hello Database Desc LS Request LS Update LS ACK Total
Recd: 500 10 20 50 20 600
Sent: 400 8 16 40 16 480
LSAs Retransmitted................0
LS Update Max Receive Rate........20 pps
LS Update Max Send Rate...........10 pps
Number of LSAs Received
T1 (Router).......................10
T2 (Network)......................0
T3 (Net Summary)..................300
T4 (ASBR Summary).................15
T5 (External).....................20
T7 (NSSA External)................0
T9 (Link Opaque)..................0
T10 (Area Opaque).................0
T11 (AS Opaque)...................0
Total.............................345
OSPFv2 Queue Statistics
Current Max Drops Limit
Hello 0 10 0 500
ACK 2 12 0 1680
Data 24 47 0 500
Event 1 8 0 1000
Parameter Description
OSPFv2 Packet
Statistics
The number of packets of each type sent and received since OSPF counters were last
cleared.
LSAs
Retransmitted
The number of LSAs retransmitted by this router since OSPF counters were last cleared.
LS Update Max
Receive Rate
The maximum rate of LS Update packets received during any 5-second interval since OSPF
counters were last cleared. The rate is in packets per second.
LS Update Max
Send Rate
The maximum rate of LS Update packets transmitted during any 5-second interval since
OSPF counters were last cleared. The rate is in packets per second.
Number of LSAs
Received
The number of LSAs of each type received since OSPF counters were last cleared.
OSPFv2 Queue
Statistics
For each OSPFv2 message queue, the current count, the high water mark, the number of
packets that failed to be enqueued, and the queue limit. The high water marks are not
cleared when OSPF counters are cleared.