Command Reference Guide

Open Shortest Path First Commands
CLI Command Reference
September 2014 Page 606
HP Moonshot Switch Module CLI Command Reference
show ip ospf virtual-link
This command displays the OSPF Virtual Interface information for a specific area and neighbor. The areaid
parameter identifies the area and the
neighbor parameter identifies the neighbor's Router ID.
show ip ospf virtual-link brief
This command displays the OSPF Virtual Interface information for all areas in the system.
Format
show ip ospf virtual-link areaid neighbor
Modes •Privileged EXEC
• User EXEC
Term Definition
Area ID The area id of the requested OSPF area.
Neighbor Router
ID
The input neighbor Router ID.
Hello Interval The configured hello interval for the OSPF virtual interface.
Dead Interval The configured dead interval for the OSPF virtual interface.
Interface
Transmit Delay
The configured transmit delay for the OSPF virtual interface.
Retransmit
Interval
The configured retransmit interval for the OSPF virtual interface.
Authentication
Type
The configured authentication type of the OSPF virtual interface.
State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router,
and backup designated router. This is the state of the OSPF interface.
Neighbor State The neighbor state.
Format
show ip ospf virtual-link brief
Modes •Privileged EXEC
• User EXEC
Term Definition
Area ID The area id of the requested OSPF area.
Neighbor The neighbor interface of the OSPF virtual interface.
Hello Interval The configured hello interval for the OSPF virtual interface.
Dead Interval The configured dead interval for the OSPF virtual interface.
Retransmit
Interval
The configured retransmit interval for the OSPF virtual interface.
Transmit Delay The configured transmit delay for the OSPF virtual interface.