Command Reference Guide

Routing Information Protocol Commands
CLI Command Reference
September 2014 Page 611
HP Moonshot Switch Module CLI Command Reference
hostroutesaccept
This command enables the RIP hostroutesaccept mode.
no hostroutesaccept
This command disables the RIP hostroutesaccept mode.
split-horizon
This command sets the RIP split horizon mode. Split horizon is a technique for avoiding problems caused by
including routes in updates sent to the router from which the route was originally learned. The options are:
None - no special processing for this case. Simple - a route will not be included in updates sent to the router
from which it was learned. Poisoned reverse - a route will be included in updates sent to the router from which
it was learned, but the metric will be set to infinity.
no split-horizon
This command sets the default RIP split horizon mode.
Default enabled
Format
hostroutesaccept
Mode Router RIP Config
Format
no hostroutesaccept
Mode Router RIP Config
Default simple
Format
split-horizon {none | simple | poison}
Mode Router RIP Config
Format
no split-horizon
Mode Router RIP Config