Command Reference Guide

Routing Information Protocol Commands
CLI Command Reference
September 2014 Page 612
HP Moonshot Switch Module CLI Command Reference
redistribute (RIP)
This command configures RIP protocol to redistribute routes from the specified source protocol/routers. There
are five possible match options. When you submit the command redistribute ospf match match-type the
match-type or types specified are added to any match types presently being redistributed. Internal routes are
redistributed by default.
no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source protocol/routers.
show ip rip
This command displays information relevant to the RIP router.
Default • metric—not-configured
•match—internal
Format for OSPF as
source protocol
redistribute ospf [metric 0-15] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external-2]]
Format for other
source protocol
redistribute {static | connected} [metric 0-15]
Mode Router RIP Config
Format
no redistribute {ospf | static | connected} [metric] [match [internal] [external 1]
[external 2] [nssa-external 1] [nssa-external-2]]
Mode Router RIP Config
Format
show ip rip
Modes •Privileged EXEC
• User EXEC
Term Definition
RIP Admin Mode Enable or disable.
Split Horizon Mode None, simple or poison reverse.
Auto Summary Mode Enable or disable. If enabled, groups of adjacent routes are summarized into single
entries, in order to reduce the total number of entries The default is enable.
Host Routes Accept Mode Enable or disable. If enabled the router accepts host routes. The default is enable.
Global Route Changes The number of route changes made to the IP Route Database by RIP. This does not
include the refresh of a route's age.
Global queries The number of responses sent to RIP queries from other systems.
Default Metric The default metric of redistributed routes if one has already been set, or blank if
not configured earlier. The valid values are 1 to 15.
Default Route Advertise The default route.