Command Reference Guide

Routing Information Protocol Commands
CLI Command Reference
September 2014 Page 613
HP Moonshot Switch Module CLI Command Reference
show ip rip interface brief
This command displays general information for each RIP interface. For this command to display successful
results routing must be enabled per interface (i.e., ip rip).
show ip rip interface
This command displays information related to a particular RIP interface. The argument unit/slot/port
corresponds to a physical routing interface or VLAN routing interface. The keyword vlan is used to specify the
VLAN ID of the routing VLAN directly instead of a unit/slot/port format.
Format
show ip rip interface brief
Modes •Privileged EXEC
• User EXEC
Term Definition
Interface unit/slot/port
IP Address The IP source address used by the specified RIP interface.
Send Version The RIP version(s) used when sending updates on the specified interface. The types are
none, RIP-1, RIP-1c, RIP-2
Receive Version The RIP version(s) allowed when receiving updates from the specified interface. The types
are none, RIP-1, RIP-2, Both
RIP Mode The administrative mode of router RIP operation (enabled or disabled).
Link State The mode of the interface (up or down).
Format
show ip rip interface {unit/slot/port|vlan 1-4093}
Modes •Privileged EXEC
• User EXEC
Term Definition
Interface The logical interface for which data is displayed.
IP Address The IP source address used by the specified RIP interface. This is a configured value.
Send Version The RIP version(s) used when sending updates on the specified interface. The types are
none, RIP-1, RIP-1c, RIP-2. This is a configured value.
Receive Version The RIP version(s) allowed when receiving updates from the specified interface. The types
are none, RIP-1, RIP-2, Both. This is a configured value.
RIP Admin Mode RIP administrative mode of router RIP operation; enable activates, disable de-activates it.
This is a configured value.
Link State Indicates whether the RIP interface is up or down. This is a configured value.
Authentication
Type
The RIP Authentication Type for the specified interface. The types are none, simple, and
encrypt. This is a configured value.