Command Reference Guide

Class of Service Commands
CLI Command Reference
September 2014 Page 625
HP Moonshot Switch Module CLI Command Reference
show interfaces cos-queue
This command displays the class-of-service queue configuration for the specified interface. The unit/slot/
port parameter is optional. If specified, the class-of-service queue configuration of the interface is displayed.
If omitted, the most recent global configuration settings are displayed.
If you specify the interface, the command also displays the following information.
Format
show interfaces cos-queue [unit/slot/port]
Mode Privileged EXEC
Term Definition
Interface Shaping Rate The global interface shaping rate value.
WRED Decay Exponent The global WRED decay exponent value.
Queue Id An interface supports 8 queues numbered 0 to 7.
Minimum Bandwidth The minimum transmission bandwidth guarantee for the queue, expressed as
a percentage. A value of 0 means bandwidth is not guaranteed and the queue
operates using best-effort. This is a configured value.
Scheduler Type Indicates whether this queue is scheduled for transmission using a strict
priority or a weighted scheme. This is a configured value.
Queue Management Type The queue depth management technique used for this queue (tail drop).
Term Definition
Interface The
unit/slot/port of the interface. If displaying the global configuration, this
output line is replaced with a Global Config indication.
Interface Shaping Rate The maximum transmission bandwidth limit for the interface as a whole. It is
independent of any per-queue maximum bandwidth value(s) in effect for the
interface. This is a configured value.
WRED Decay Exponent The configured WRED decay exponent for a CoS queue interface.