Command Reference Guide

DiffServ Policy Commands
CLI Command Reference
September 2014 Page 638
HP Moonshot Switch Module CLI Command Reference
mirror
This command specifies that all incoming packets for the associated traffic stream are copied to a specific
egress interface (physical port or LAG).
redirect
This command specifies that all incoming packets for the associated traffic stream are redirected to a specific
egress interface (physical port or port-channel).
conform-color
Use this command to enable color-aware traffic policing and define the conform-color class map. Used in
conjunction with the police command where the fields for the conform level are specified. The
class-map-name
parameter is the name of an existing DiffServ class map.
Format
mirror unit/slot/port
Mode Policy-Class-Map Config
Incompatibilities Drop, Redirect
Format
redirect unit/slot/port
Mode Policy-Class-Map Config
Incompatibilities Drop, Mirror
Note: This command may only be used after specifying a police command for the policy-class
instance.
Format
conform-color class-map-name
Mode Policy-Class-Map Config