Command Reference Guide

Telnet Commands
CLI Command Reference
September 2014 Page 64
HP Moonshot Switch Module CLI Command Reference
session-limit
This command specifies the maximum number of simultaneous outbound Telnet sessions. A value of 0
indicates that no outbound Telnet session can be established.
no session-limit
This command sets the maximum number of simultaneous outbound Telnet sessions to the default value.
session-timeout
This command sets the Telnet session timeout value.The timeout value unit of time is minutes.
no session-timeout
This command sets the Telnet session timeout value to the default. The timeout value unit of time is minutes.
telnetcon maxsessions
This command specifies the maximum number of Telnet connection sessions that can be established. A value
of 0 indicates that no Telnet connection can be established. The range is 0-5.
Default 5
Format
session-limit 0-5
Mode Line Config
Format
no session-limit
Mode Line Config
Default 5
Format
session-timeout 1-160
Mode Line Config
Format
no session-timeout
Mode Line Config
Default 5
Format
telnetcon maxsessions 0-5
Mode Privileged EXEC