Command Reference Guide

DiffServ Policy Commands
CLI Command Reference
September 2014 Page 641
HP Moonshot Switch Module CLI Command Reference
police-simple
This command is used to establish the traffic policing style for the specified class. The simple form of the police
command uses a single data rate and burst size, resulting in two outcomes: conform and violate. The
conforming data rate is specified in kilobits-per-second (Kbps) and is an integer from 1 to 4294967295. The
conforming burst size is specified in kilobytes (KB) and is an integer from 1 to 128.
For each outcome, the only possible actions are drop, set-cos-as-sec-cos, set-cos-transmit, set-sec-cos-
transmit, set-dscp-transmit, set-prec-transmit, or transmit. In this simple form of the police command, the
conform action defaults to transmit and the violate action defaults to drop. These actions can be set with this
command once the style has been configured.
For set-dscp-transmit, a
dscpval value is required and is specified as either an integer from 0 to 63, or
symbolically through one of the following keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41,
af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
For set-prec-transmit, an IP Precedence value is required and is specified as an integer from 0-7.
For set-cos-transmit an 802.1p priority value is required and is specified as an integer from 0-7.
Example: The following shows an example of the command.
(Routing) (Config-policy-classmap)#police-simple 1 128 conform-action transmit violate-action drop
police-two-rate
This command is the two-rate form of the police command and is used to establish the traffic policing style for
the specified class. For each outcome, the only possible actions are drop, set-cos-as-sec-cos, set-cos-transmit,
set-sec-cos-transmit, set-dscp-transmit, set-prec-transmit, or transmit. In this two-rate form of the police
command, the conform action defaults to send, the exceed action defaults to drop, and the violate action
defaults to drop. These actions can be set with this command once the style has been configured.
Format
police-simple {1-4294967295 1-128 conform-action {drop | set-cos-as-sec-cos | set-
cos-transmit 0-7 | set-sec-cos-transmit 0-7 | set-prec-transmit 0-7 | set-dscp-
transmit 0-63 | transmit} [violate-action {drop | set-cos-as-sec-cos | set-cos-
transmit 0-7 | set-sec-cos-transmit 0-7 | set-prec-transmit 0-7 | set-dscp-
transmit 0-63 | transmit}]}
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark (all forms)
Format
police-two-rate {1-4294967295 1-4294967295 1-128 1-128 conform-action {drop | set-
cos-as-sec-cos | set-cos-transmit 0-7 | set-sec-cos-transmit 0-7 | set-prec-
transmit 0-7 | set-dscp-transmit 0-63 | transmit} exceed-action {drop | set-cos-
as-sec-cos | set-cos-transmit 0-7 | set-sec-cos-transmit 0-7 | set-prec-transmit
0-7 | set-dscp-transmit 0-63 | transmit} [violate-action {drop | set-cos-as-sec-
cos | set-cos-transmit 0-7 | set-sec-cos-transmit 0-7 | set-prec-transmit 0-7 |
set-dscp-transmit 0-63 | transmit}]}
Mode Policy-Class-Map Config