Command Reference Guide

DiffServ Show Commands
CLI Command Reference
September 2014 Page 645
HP Moonshot Switch Module CLI Command Reference
If you do not specify the Class Name, this command displays a list of all defined DiffServ classes. The following
fields are displayed:
show diffserv
This command displays the DiffServ General Status Group information, which includes the current
administrative mode setting as well as the current and maximum number of rows in each of the main DiffServ
private MIB tables. This command takes no options.
Values The values of the Match Criteria.
Term Definition
Class Name The name of this class. (Note that the order in which classes are displayed is not necessarily
the same order in which they were created.)
Class Type A class type of all means every match criterion defined for the class is evaluated
simultaneously and must all be true to indicate a class match.
L3 Proto The Layer 3 protocol for this class. Possible values are IPv4 and IPv6.
Ref Class Name The name of an existing DiffServ class whose match conditions are being referenced by the
specified class definition.
Format
show diffserv
Mode Privileged EXEC
Term Definition
DiffServ Admin mode The current value of the DiffServ administrative mode.
Class Table Size Current/
Max
The current and maximum number of entries (rows) in the Class Table.
Class Rule Table Size
Current/Max
The current and maximum number of entries (rows) in the Class Rule Table.
Policy Table Size
Current/Max
The current and maximum number of entries (rows) in the Policy Table.
Policy Instance Table
Size Current/Max
The current and maximum number of entries (rows) in the Policy Instance Table.
Policy Instance Table
Max Current/Max
The current and maximum number of entries (rows) for the Policy Instance Table.
Policy Attribute Table
Max Current/Max
The current and maximum number of entries (rows) for the Policy Attribute Table.
Service Table Size
Current/Max
The current and maximum number of entries (rows) in the Service Table.
Term Definition