Command Reference Guide

DiffServ Show Commands
CLI Command Reference
September 2014 Page 648
HP Moonshot Switch Module CLI Command Reference
If the Policy Name is not specified this command displays a list of all defined DiffServ policies. The following
fields are displayed:
Example: The following shows example CLI display output including the mark-cos-as-sec-cos option
specified in the policy action.
(Routing) #show policy-map p1
Policy Name.................................... p1
Policy Type.................................... In
Class Name..................................... c1
Mark CoS as Secondary CoS...................... Yes
Example: The following shows example CLI display output including the mark-cos-as-sec-cos action used in
the policing (simple-police or police two-rate) command.
(Routing) #show policy-map p2
Policy Name....................... p2
Policy Type....................... In
Class Name........................ c2
Policing Style.................... Police Two Rate
Committed Rate.................... 1
Committed Burst Size.............. 1
Peak Rate......................... 1
Peak Burst Size................... 1
Conform Action.................... Mark CoS as Secondary CoS
Exceed Action..................... Mark CoS as Secondary CoS
Non-Conform Action................ Mark CoS as Secondary CoS
Conform Color Mode................ Blind
Exceed Color Mode................. Blind
Term
Definition
Policy Name The name of this policy. (The order in which the policies are displayed is not necessarily the
same order in which they were created.)
Policy Type The policy type (Only inbound is supported).
Class Members List of all class names associated with this policy.