Command Reference Guide

DiffServ Show Commands
CLI Command Reference
September 2014 Page 649
HP Moonshot Switch Module CLI Command Reference
show diffserv service
This command displays policy service information for the specified interface and direction. The unit/slot/port
parameter specifies a valid unit/slot/port number for the system.
show diffserv service brief
This command displays all interfaces in the system to which a DiffServ policy has been attached. The inbound
direction parameter is optional.
The following information is repeated for interface and direction (only those interfaces configured with an
attached policy are shown):
Format
show diffserv service unit/slot/port [{in | out}]
Mode Privileged EXEC
Term Definition
DiffServ Admin
Mode
The current setting of the DiffServ administrative mode. An attached policy is only in effect
on an interface while DiffServ is in an enabled mode.
Interface unit/slot/port
Direction The traffic direction of this interface service.
Operational
Status
The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direction.
Policy Details Attached policy details, whose content is identical to that described for the show policy-
map
policymapname command (content not repeated here for brevity).
Format
show diffserv service brief [{in | out}]
Mode Privileged EXEC
Term Definition
DiffServ Mode The current setting of the DiffServ administrative mode. An attached policy is only active
on an interface while DiffServ is in an enabled mode.
Term Definition
Interface unit/slot/port
Direction The traffic direction of this interface service.
OperStatus The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direction.