Command Reference Guide

Management Access Control List
CLI Command Reference
September 2014 Page 654
HP Moonshot Switch Module CLI Command Reference
deny priority
Use the deny priority command in Management Access-List Configuration mode to assign a priority to the
rule. Each rule should have a unique priority.
management access-class
Use this command to activate the configured management ALC and restrict management connections within
the management ACL. The
name parameter is the name of the existing management ACL. You cannot update
or remove a management ACL when it is active.
no management access-class
This command disables a management ACL on the system.
Format
deny priority priority
Mode Management access-list configuration
Format
management access-class name
Mode Global Config
Format
no management access-class
Mode Global Config