Command Reference Guide

Telnet Commands
CLI Command Reference
September 2014 Page 66
HP Moonshot Switch Module CLI Command Reference
show telnet
This command displays the current outbound Telnet settings. In other words, these settings apply to Telnet
connections initiated from the switch to a remote system.
show telnetcon
This command displays the current inbound Telnet settings. In other words, these settings apply to Telnet
connections initiated from a remote system to the switch.
Format
show telnet
Modes •Privileged EXEC
• User EXEC
Term Definition
Outbound Telnet Login Timeout The number of minutes an outbound Telnet session is allowed to remain
inactive before being logged off.
Maximum Number of Outbound
Telnet Sessions
The number of simultaneous outbound Telnet connections allowed.
Allow New Outbound Telnet
Sessions
Indicates whether outbound Telnet sessions will be allowed.
Format
show telnetcon
Modes •Privileged EXEC
• User EXEC
Term Definition
Remote Connection Login
Timeout (minutes)
This object indicates the number of minutes a remote connection session is
allowed to remain inactive before being logged off. May be specified as a
number from 1 to 160. The factory default is 5.
Maximum Number of Remote
Connection Sessions
This object indicates the number of simultaneous remote connection
sessions allowed. The factory default is 5.
Allow New Telnet Sessions New Telnet sessions will not be allowed when this field is set to no. The
factory default value is yes.
Telnet Server Admin Mode The administrative mode of the telnet server on the system.