Command Reference Guide

MAC Access Control List Commands
CLI Command Reference
September 2014 Page 661
HP Moonshot Switch Module CLI Command Reference
show mac access-lists
This command displays a MAC access list and all of the rules that are defined for the MAC ACL. Use the [name]
parameter to identify a specific MAC ACL to display. The rate-limit attribute displays committed rate and
committed burst size.
Note: The command output varies based on the match criteria configured within the rules of an ACL.
Format
show mac access-lists [name]
Mode Privileged EXEC
Term Definition
Rule Number The ordered rule number identifier defined within the MAC ACL.
Action The action associated with each rule. The possible values are Permit or Deny.
Source MAC
Address
The source MAC address for this rule.
Source MAC
Mask
The source MAC mask for this rule.
Committed Rate The committed rate defined by the rate-limit attribute.
Committed Burst
Size
The committed burst size defined by the rate-limit attribute.
Destination MAC
Address
The destination MAC address for this rule.
Ethertype The Ethertype keyword or custom value for this rule.
VLAN ID The VLAN identifier value or range for this rule.
COS The COS (802.1p) value for this rule.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this rule are assigned.
Mirror Interface The
unit/slot/portto which packets matching this rule are copied.
Redirect Interface The
unit/slot/port to which packets matching this rule are forwarded.
Time Range
Name
Displays the name of the time-range if the MAC ACL rule has referenced a time range.
Rule Status Status (Active/Inactive) of the MAC ACL rule.