Command Reference Guide

IP Access Control List Commands
CLI Command Reference
September 2014 Page 669
HP Moonshot Switch Module CLI Command Reference
If you specify an IP ACL number or name, the following information displays:
Example: The following shows example CLI display output for the command.
(Routing) #show ip access-lists ip1
ACL Name: ip1
Inbound Interface(s): 1/0/30
Interface(s) Identifies the interface(s) to which the ACL is applied (ACL interface bindings).
VLAN(s) Identifies the VLANs to which the ACL is applied (ACL VLAN bindings).
Note: Only the access list fields that you configure are displayed. Thus, the command output varies
based on the match criteria configured within the rules of an ACL.
Term Definition
Rule Number The number identifier for each rule that is defined for the IP ACL.
Action The action associated with each rule. The possible values are Permit or Deny.
Match All Indicates whether this access list applies to every packet. Possible values are
True or False.
Protocol The protocol to filter for this rule.
Committed Rate The committed rate defined by the rate-limit attribute.
Committed Burst Size The committed burst size defined by the rate-limit attribute.
Source IP Address The source IP address for this rule.
Source IP Mask The source IP Mask for this rule.
Source L4 Port Keyword The source port for this rule.
Destination IP Address The destination IP address for this rule.
Destination IP Mask The destination IP Mask for this rule.
Destination L4 Port Keyword The destination port for this rule.
IP DSCP The value specified for IP DSCP.
IP Precedence The value specified IP Precedence.
IP TOS The value specified for IP TOS.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this rule are assigned.
Mirror Interface The unit/slot/port to which packets matching this rule are copied.
Redirect Interface The unit/slot/port to which packets matching this rule are forwarded.
Time Range Name Displays the name of the time-range if the IP ACL rule has referenced a time
range.
Rule Status Status (Active/Inactive) of the IP ACL rule.
Term Definition