Command Reference Guide

IP Access Control List Commands
CLI Command Reference
September 2014 Page 671
HP Moonshot Switch Module CLI Command Reference
show access-lists vlan
This command displays Access List information for a particular VLAN ID. The vlan-id parameter is the VLAN ID
of the VLAN with the information to view. The
{in | out} options specifies the direction of the VLAN ACL
information to view.
Format
show access-lists vlan vlan-id {in | out}
Mode Privileged EXEC
Term Definition
ACL Type Type of access list (IP, IPv6, or MAC).
ACL ID Access List name for a MAC or IPv6 access list or the numeric identifier for an IP access list.
Sequence
Number
An optional sequence number may be specified to indicate the order of this access list
relative to other access lists already assigned to this interface and direction. A lower
number indicates higher precedence order. If a sequence number is already in use for this
interface and direction, the specified access list replaces the currently attached access list
using that sequence number. If the sequence number is not specified by the user, a
sequence number that is one greater than the highest sequence number currently in use
for this interface and direction is used. Valid range is (1 to 4294967295).