Command Reference Guide

Time Range Commands for Time-Based ACLs
CLI Command Reference
September 2014 Page 679
HP Moonshot Switch Module CLI Command Reference
The information in the following table displays when a time range name is specified.
Term Definition
Time Range Name Name of the time range.
Time Range Status Status of the time range (active/inactive)
Periodic Entry count The number of periodic entries configured for the time range.
Absolute Start Time If an absolute entry has been configured, this field shows the start time and day
for absolute time entry.
Absolute End Time If an absolute entry has been configured, this field shows the end time and day for
absolute time entry.
Periodic Entries Number of periodic entries in a time-range.
Frequency Indicates how often this periodic entry will become active. If the value is set to 0,
the option will be disabled and a periodic entry will become active only once.
Periodic Start Time Start time and day for periodic entry.
Periodic End Time End time and day for periodic entry.