Command Reference Guide

Secure Shell Commands
CLI Command Reference
September 2014 Page 68
HP Moonshot Switch Module CLI Command Reference
sshcon maxsessions
This command specifies the maximum number of SSH connection sessions that can be established. A value of
0 indicates that no ssh connection can be established. The range is 0 to 5.
no sshcon maxsessions
This command sets the maximum number of allowed SSH connection sessions to the default value.
sshcon timeout
This command sets the SSH connection session timeout value, in minutes. A session is active as long as the
session has been idle for the value set. The time is a decimal value from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session is re accessed. Also,
any keystroke activates the new timeout duration.
no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is re accessed. Also,
any keystroke activates the new timeout duration.
Default 5
Format
sshcon maxsessions 0-5
Mode Privileged EXEC
Format
no sshcon maxsessions
Mode Privileged EXEC
Default 5
Format
sshcon timeout 1-160
Mode Privileged EXEC
Format
no sshcon timeout
Mode Privileged EXEC