Command Reference Guide

iSCSI Optimization Commands
CLI Command Reference
September 2014 Page 684
HP Moonshot Switch Module CLI Command Reference
(Routing)#show classofservice dot1p-mapping
User Priority Traffic Class
------------- -------------
0 1
1 0
2 0
3 1
4 2
5 2
6 3
6 3
show iscsi sessions
This command displays the iSCSI sessions.
Example: The following example displays the iSCSI sessions.
(Routing) # show iscsi sessions
Target: iqn.1993-11.com.disk-vendor:diskarrays.sn.45678
-----------------------------------------------------------
Initiator: iqn.1992-04.com.os-vendor.plan9:cdrom.12
ISID: 11
Initiator: iqn.1995-05.com.os-vendor.plan9:cdrom.10
ISID: 222
-----------------------------------------------------------
Target: iqn.103-1.com.storage-vendor:sn.43338.
storage.tape:sys1.xyz
Session 3:
Initiator: iqn.1992-04.com.os-vendor.plan9:cdrom.12
Session 4:
Initiator: iqn.1995-05.com.os-vendor.plan9:cdrom.10
-----------------------------------------------------------
(Routing)# show iscsi sessions detailed
Target: iqn.1993-11.com.disk-vendor:diskarrays.sn.45678
-----------------------------------------------------------
Session 1:
Initiator: iqn.1992-04.com.os
vendor.plan9:cdrom.12.storage:sys1.xyz
-----------------------------------------------------------
Time started: 17-Jul-2008 10:04:50
Time for aging out: 10 min
ISID: 11
Initiator Initiator Target Target
IP address TCP port IP address IP port
Default
If not specified, sessions are displayed in short mode (not detailed).
Format
show iscsi sessions [detailed]
Mode Privileged EXEC