Command Reference Guide

Utilities
CLI Command Reference
September 2014 Page 689
HP Moonshot Switch Module CLI Command Reference
DHCP Filtering Error on call to sysapiCfgFileWrite file Error on trying to save configuration.
Table 21: NVStore Log Messages
Component Message Cause
NVStore Building defaults for file XXX A component’s configuration file does not
exist or the file’s checksum is incorrect so the
component’s default configuration file is
built.
NVStore Error on call to osapiFsWrite routine on file
XXX
Either the file cannot be opened or the OS’s
file I/O returned an error trying to write to
the file.
NVStore File XXX corrupted from file system.
Checksum mismatch.
The calculated checksum of a component’s
configuration file in the file system did not
match the checksum of the file in memory.
NVStore Migrating config file XXX from version Y to Z A configuration file version mismatch was
detected so a configuration file migration has
started.
Table 22: RADIUS Log Messages
Component Message Cause
RADIUS RADIUS: Invalid data length - xxx The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Failed to send the request A problem communicating with the RADIUS
server.
RADIUS RADIUS: Failed to send all of the request A problem communicating with the RADIUS
server during transmit.
RADIUS RADIUS: Could not get the Task Sync
semaphore!
Resource issue with RADIUS Client service.
RADIUS RADIUS: Buffer is too small for response
processing
RADIUS Client attempted to build a response
larger than resources allow.
RADIUS RADIUS: Could not allocate accounting
requestInfo
Resource issue with RADIUS Client service.
RADIUS RADIUS: Could not allocate requestInfo Resource issue with RADIUS Client service.
RADIUS RADIUS: osapiSocketRecvFrom returned
error
Error while attempting to read data from the
RADIUS server.
RADIUS RADIUS: Accounting-Response failed to
validate, id = xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: User (xxx) needs to respond for
challenge
An unexpected challenge was received for a
configured user.
RADIUS RADIUS: Could not allocate a buffer for the
packet
Resource issue with RADIUS Client service.
Table 20: DHCP Filtering Log Messages (Cont.)
Component Message Cause