Command Reference Guide

Utilities
CLI Command Reference
September 2014 Page 690
HP Moonshot Switch Module CLI Command Reference
RADIUS RADIUS: Access-Challenge failed to validate,
id = xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Failed to validate Message-
Authenticator, id = xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Access-Accept failed to validate,
id = xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Invalid packet length – xxx The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Response is missing Message-
Authenticator, id = xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Server address doesn't match
configured server
RADIUS Client received a server response
from an unconfigured server.
Table 23: TACACS+ Log Messages
Component Message Cause
TACACS+ TACACS+: authentication error, no server to
contact
TACACS+ request needed, but no servers are
configured.
TACACS+ TACACS+: connection failed to server x.x.x.x TACACS+ request sent to server x.x.x.x but no
response was received.
TACACS+ TACACS+: no key configured to encrypt
packet for server x.x.x.x
No key configured for the specified server.
TACACS+ TACACS+: received invalid packet type from
server.
Received packet type that is not supported.
TACACS+ TACACS+: invalid major version in received
packet.
Major version mismatch.
TACACS+ TACACS+: invalid minor version in received
packet.
Minor version mismatch.
Table 24: LLDP Log Message
Component Message Cause
LLDP lldpTask(): invalid message type:xx. xxxxxx:xx Unsupported LLDP packet received.
Table 25: SNTP Log Message
Component Message Cause
SNTP SNTP: system clock synchronized on %s UTC Indicates that SNTP has successfully
synchronized the time of the box with the
server.
Table 22: RADIUS Log Messages (Cont.)
Component Message Cause