Command Reference Guide

Switching
CLI Command Reference
September 2014 Page 699
HP Moonshot Switch Module CLI Command Reference
802.1Q Problem deleting data for VLAN %d Failed to delete VLAN ID from the VLAN
database.
802.1Q Dynamic entry %d can only be modified after it
is converted to static
Failed to modify the VLAN group filter
802.1Q Cannot find vlan %d to convert it to static Failed to convert Dynamic VLAN to static
VLAN. VLAN ID not exists.
802.1Q Only Dynamically created vlans can be
converted
Error while trying to convert the static
created VLAN ID to static.
802.1Q Cannot modify tagging of interface %s to non
existence vlan %d"
Error for a given interface sets the tagging
property for all the vlans in the vlan mask.
802.1Q Error in updating data for VLAN %d in VLAN
database
Failed to add VLAN entry into VLAN database.
802.1Q DTL call to create VLAN %d failed with rc %d Failed to add VLAN entry in hardware.
802.1Q Not valid permission to delete the VLAN %d Failed to delete static VLAN ID. Invalid
requestor.
802.1Q Attempt to set access vlan with an invalid vlan id
%d
Invalid VLAN ID.
802.1Q Attempt to set access vlan with (%d) that does
not exist
VLAN ID not exists.
802.1Q VLAN create currently underway for VLAN ID
%d
Creating a VLAN which is already under
process of creation.
802.1Q VLAN ID %d is already exists as static VLAN Trying to create already existing static VLAN
ID.
802.1Q Cannot put a message on dot1q msg Queue,
Returns:%d
Failed to send Dot1q message on Dot1q
message Queue.
802.1Q Invalid dot1q Interface: %s Failed to add VLAN to a member of port.
802.1Q Cannot set membership for user interface %s on
management vlan %d
Failed to add VLAN to a member of port.
802.1Q Incorrect tagmode for vlan tagging. tagmode:
%d Interface: %s
Incorrect tagmode for VLAN tagging.
802.1Q Cannot set tagging for interface %d on non
existent vlan %d"
The VLAN ID does not exist.
802.1Q Cannot set tagging for interface %d which is not
a member of vlan %d
Failure in Setting the tagging configuration
for a interface on a range of vlan.
802.1Q VLAN create currently underway for VLAN ID
%d"
Trying to create the VLAN ID which is already
under process of creation.
802.1Q VLAN ID %d already exists Trying to create the VLAN ID which is already
exists.
802.1Q Failed to delete, Default VLAN %d cannot be
deleted
Trying to delete Default VLAN ID.
802.1Q Failed to delete, VLAN ID %d is not a static VLAN Trying to delete Dynamic VLAN ID from CLI.
802.1Q Requestor %d attempted to release internal
vlan %d: owned by %d
-
Table 45: 802.1Q Log Messages (Cont.)
Component Message Cause